User guide

Connecting the Raven XE
Rev 2.0 Oct.09 28
Tip: If you have configured the Raven XE for settings different than
the defaults for Bits per Second, Data Bits, Parity, and/or Stop Bits,
you will need to use your changed settings.
c. SelectOK.
UsingEthernet:
d. SelectTCP/IP(Winsock)for“ConnectUsing”.
e. Changethe“PortNumber” to2332 .
f. SelectOK.
3. Connected
ConnectingonUSB/netwillpromptforpassword.
192.168.14.31