User guide

Rev 1.0A Mar.10 29
4. Set the MDN and MSID.
AT~NAMVAL=0,MDN,MSID,0,65535
5. Verify the settings are what you intended to enter.
AT~NAMVAL?0
6. Reset the module.
AT!RESET
7. Press the reset button on the front of the modem. When the
modem restarts, it should register on the network.
Hardware Installation
Note: During installation,
please be sure that the
cables are secure but do
not bear any additional
weight that could loosen
the connector from the
unit.
Your PinPoint XT should be mounted in a position that allows easy
access for the cables so they are not bent, constricted, in close
proximity to high amperage, or exposed to extreme temperatures.
The LEDs on the front panel should be visible for ease of operational
verification. You should ensure that there is adequate airflow around
the modem but that it is kept free from direct exposure to the
elements, such as sun, rain, dust, etc.
Caution: The PinPoint XT is in a hardened case and designed for use in
industrial and extreme environments. However, unless you are using cables
expressly designed for such environments, they can fail if exposed to the
same conditions the PinPoint XT can withstand.
Figure 0-5: PinPoint XT Connectors
Cellular