User guide

Rev 1.0A Mar.10 25
Figure 0-1: Launch Screen
b. Choose the interface you want to program the modem
through and click on Next.
Note: You can use Boot interface only when a serial cable connection is
established.
The default private for Ethernet is also in a different subnet from the
other connection types.
*can be changed via ACEmanager
Table 0-1: Factory Defaults
Interface PinPoint XT Connected Device
Ethernet Private default 192.168.13.31* 192.168.13.100
USB/NET 192.168.14.31 192.168.14.100
DUN 192.168.15.31 192.168.15.100
Wi-Fi* 192.168.17.31 192.168.17.100