User guide

Rev 1.0A Mar.10 23
Activating your PinPoint XT on Sprint
Network
• OMA-DM
• Hands Free
Activation (HFA)
• Activating PinPoint
XT
• Updating PinPoint
XT firmware
• Configuring through
ACEmanager
• Hardware
Installation
• Power
• Indicator Lights
This Quick Start guide provides step-by-step directions for activating
your PinPoint XT on Sprint’s network.
Tip: For additional configuration options, refer to the User Guide for your
PinPoint XT.
OMA-DM
PinPoint XT is an embedded router solution that supports Network
Initiated (NI) OMA-DM Device Configuration (DC) and PRL Updates
(PRL) on the Sprint network. The PinPoint XT firmware registers
notifications with the MC5727 radio module for OMA-DM NI alerts
and session state and processes them appropriately. The alert
response instructs the radio module to immediately process the NI
OMA-DM command. When the OMA-DM session state is IDLE,
PinPoint XT records the session type and session result code and
then re-establishes the data connection.
Hands Free Activation (HFA)
PinPoint XT automatically detects the radio module installed during
system startup. If the radio module is CDMA technology, PinPoint XT
will check the current provisioning state and if necessary execute
HFA. For devices that have previously been provisioned the HFA
routine is bypassed.