User guide

Hardware Installation of the PinPoint X
Rev 4.0 Oct.09 23
Indicator Lights
WhenyourPinPointXisconnectedtopowerandanantenna,
thereisaspecificpatterntothelightstoindicateitsoperation 
mode.
Figure 4-8: PinPoint X Indicator lights
• Network‐Indicatesasuccessfulconnectiontothecellular
networkwithanIPaddressgivenandachannelacquired.
• Signal‐Lightshowsthestrengthofthesignalandmaybe
nearlysolid(strongsignal)orflashing(weakersignal).A
slowflashindicatesaveryweaksignal.
• Activity‐Lightswillflashasdataistransferredtoand
fromthePinPointmodemontheremotenetwork.
• Service‐IndicateswhentheconnectionisHSUPA/HSDPA
orUMTS.UnlitindicatesEDGEorGPRS.
• GPS‐IndicatesaGPSfix.Whenlit,thePinPointX has
GPScoordinatestoreport.
• Power‐Indicatesthepoweradapterisconnectedand
thereispowergettingtothePinPointX.
• TheResetbutton(ontheleftsideofthePinPointX)has
twofunctions.Ifitisquicklydepressedandreleased,the
modemwillsimplypowercycletheinternalhardware.If,
however, theresetisdepressedandheldforseveral
RSSI LED Ranges
RSSI/Signal LED Status Ranges of RSSI (dBm)
On Solid Equal to or stronger than -69
Fast Blink -70 to -79
Normal blink -80 to -89
Slow Blink -90 to -99
Extinguished Equal to or weaker than -100