User guide

Modem Doctor
Rev 3.0C Apr.08 73
3. PressErase.Themodemwillthenreset.
Note: If you erase the fatory defaults will be restored. USBnet is the
factory default port.
Figure 13-12: Modem Doctor: USB connection
Put the Modem in SOS mode
ThisoptionwillreturnyourmodemtoATmodeandresetthe
serialportto115200,8N1.Thiswillallowyoutoconnectto
themodemusingAceManageroranyotherdirectserial
communication.Youonlyhaveoneoptiontoconnecttothe
modem.SelecttheCOMporttowhichthe
modemis
connected.
Figure 13-13: Serial Connect
Note: You can only use this option with a serial port modem and only
if the modem is connected directly to your computer with a serial
cable. You cannot use USB/serial to place the modem into SoS mode.