User guide

Modem Doctor
Rev 3.0C Apr.08 69
Note: If it is the first time you’re using SMS to connect to a modem,
you will need to configure your computer to send SMS messages to
the modem using email. See “Advanced SMS Settings” on page 5.
Boot:Ifyourcomputerisconnecteddirectlytothemodem
withaserialcable,youcanuse thisoptiontoaccessthe
modem.SelecttheCOMporttowhichthemodemis
connected.Selectthebaudratetocommunicatewiththe
modem(modemdefault:115200).
Figure 13-4: Boot Connect
Caution: You cannot use Boot with USB/Serial.
Ethernet:Ifyourcomputerisconnecteddirectlytothemodem
withanEthernetcable,youcanusethisoptiontoaccessthe
modem.TypeintheIPaddressorfullyqualifieddomain
nameofyourmodem.IfyouhaveusedModemDoctorprevi
‐
ously,youcanselectIPaddressesornamesusedbefore.Enter
themodempassword(default:12345).
Figure 13-5: Ethernet Connect
Whenyouconnecttothemodem,ModemDoctorwillbegin
thediagnosticsdatadownload.
Note: For the Boot connection, you will be asked to reset the modem.