User guide

Rev 3.0C Apr.08 61
10
10: I/O Group
Thisgroupincludesconfigurationcommandsforthedigital
andanaloginputsandrelayoutputs.Someofthevalues
shownasapartofthisgrouparenotchangeablebutreflectthe
currentstatus.Onlythosemodemswithavailableinputsand
outputswilldisplaythisgroup.
Figure 10-1: AceManager : I/O
*ANALOGINn?
Query individual analog inputs. The analog inputs report the voltage
in volts.
• n=1‐4Inputnumber
*DIGITALINn?
Queryindividualdigitalinputs.Thedigitalinputsreport
eithera0(open)or1(closed).
• n=1‐4Inputnumber
*IOSTATE=n,s
Querythefullsetofdigitalinputs.
• n=1‐4Inputnumber
Whenyouquerytheinputs(AT*IOSTATE?),theywillallbe
listedwiththeircurrentstate.Example:
DI1 OPEN
DI2 CLOSED