User guide

Ace Manager
56 20070914
• n=1:Sentwhenoutofcellularcoverage
Note: When set to 1, no reports are saved in SnF.
*PGPSD
PGPSDisa16‐bitvaluethatisthenumberofsecondstowait
whenʺOutofCoverageʺoccursbeforeswitchingto,sending
themessagesouttheserialportandnotintoSnF.
Note: Any messages put into SnF during this switchover delay period
will be sent OTA, when coverage is re-acquired.
Note: The two persistent GPS
report parameters, *PGPSR and
*PGPSF, will control the report
type and frequency of the
messages sent out the serial
port, when out of coverage.