User guide

Ace Manager
54 20070914
Note: If both AT*PPCOM1000=1 and AT*PPREPORTINPUTS=1 are
enabled, the PinPoint X digital inputs will be reported and the
COM1000 inputs will be ignored.
*PPSNF=n
StoreandForwardwillcauseGPSreportstobestoredupifthe
yourmodemgoesoutofnetworkcoverage.Oncethevehicleis
incoveragetheGPSreportswillbesentenmassetotheserver.
• n=0:Disabled
• n=1:Enabled(default)
*PPSNFB=n
StoreandForwardBehavior.When*PPSNF=1,thetypeof
StoreandForwardbehaviorisdefinedby:
• n=0:NormalStoreandForward.Dataisstoredwhenthe
yourmodemisoutofcellularcoverage;whentheyour
modemisincoverage,dataissenttoserverassoonas
possible.ThisisthedefaultforPinPointswithRAPversion
1.3orlower.
• n=1:Datasentonlywhenpolled.Dataisstoreduntil
polledusingthePollcommandsentbyaserver.
• n=2:GroupedReports.Dataisstoreduntilthedesired
minimumnumberofreports(see*PPSNFM)hasbeen
stored.Thedataisthensenttotheserveringroupswithat
leastthespecifiednumberofreports.
*PPSNFM=n
StoreandForwardMinimumReports.Specifiestheminimum
numberofreportsthatmustbestoredbeforetheyare
forwardedtotheserver.Thedataisthensenttotheserverin
packetsthatcontainatleastthisnumberofreports.
• n=0‐255
*PPSNFR=n
StoreandForwardReliability:GPSreportswillberetrans‐
mittedifnotacknowledgedbytheserver.
• n=0:Disabled
• n=1:ReliablemodeenabledforRAPmessages
• n=2:Simplereliablemode
*PPTAIPID=nnnn
Sets/queriestheTAIPID.ThisIDisreturnedinTAIPreportsif
ithasbeennegotiatedwiththeTAIPclient.Thisvalueisonly
usedinconjunctionwithTAIPemulationmode(*PPGPSR=F0).