User guide

PinPoint Group
Rev 3.0C Apr.08 53
• n=0x13:StandardGPSReport+UTCDate+RFdata
• n=0xE0:GGAandVTGNMEAreports
• n=0xE1:GGA,VTGandRMCNMEAreports
• n=0xF0:TAIPreports
• n=0xF1:CompactTAIPdata
*PPMAXRETRIES=n
MaximumnumberretrieswheninSimpleReliableMode.
PinPointXonly.
• n=0:Disabled
• n=1‐255retries
*PPMINTIME=n
Specifiestheminimumamountoftimebetweenreports
generatedduetoeitherthetimeinterval(*PPTIME)orthe
distanceinterval(*PPDIST).Thisisusefultolimitnetwork
trafficandmakemoreefficientuseofbandwidth.Thiscanbe
usedinconjunctionwithstoreandforward.Theminimum
valuewhichthissetting
cantakedependsonthepoliciesofthe
carrier.
• n=0:Disabled
• n=1‐65535seconds
*PPODOM=n
Enableodometerreporting.
• n=0:Disabled(default)
• n=1:Enabled
*PPODOMVAL=n
Thecurrentodometervalueoftheyourmodem.Thevalueis
inmeters.Maximumvalueisapproximately4.3billionmeters
(2.5millionmiles).1mileisapproximately1600meters.
• n=meters
*PPPORT=n
PortwhereGPSreportsaresent.
• n=1‐65535
*PPREPORTINPUTS=n
Enableinputreporting.
• n=0:Disabled
• n=1:Enabled