User guide

PinPoint Group
Rev 3.0C Apr.08 51
*PPDIST=n
GPSReportDistanceIntervalin100MeterUnits(kilometer).1
mileisapproximately1600kilometers.
• n=0:Disabled
• n=1‐65535
*PPFLUSHONEVT=n
Flushesstoreandforwardbufferwhenaninputevent(DTR/
RTS)occurs.
• n=0:Disable
• n=1:Enable
*PPGPSDATUM=n
SpecifiestheGPSdatumtouseforpositionreports.For
accurateresults,thisvalueshouldmatchthedatumusedby
receivingmappingapplication.
• n=0:WGS84
• n=92:NAD27
• n=115:NAD83
Note: This command may not be available for your your modem
PinPoint or PinPoint-E. This requires specific internal hardware as
well as a recent version of ALEOS. All PinPoint X modems should
have this feature.
*PPGPSSENTENCES=n
SpecifiestheNMEAsentencestodisplayintheNMEAGPS
Report.
• n=0‐65535(hex)
*PPGPSR=n
GPSreporttype.
• n=0:Uselegacyreportsspecifiedin*MFvalue.Note:Must
alsohave*PPDEVID=0.
• n=0x11:StandardGPSReport
• n=0x12:StandardGPSReport+UTCDate
• n=0x13:StandardGPSReport+UTCDate+RFdata
• n=0xE0:GGAandVTGNMEAreports
• n=0xE1:GGA,VTGandRMCNMEAreports
• n=0xF0:TAIPreports
• n=0xF1:CompactTAIPdata