User guide

Rev 3.0C Apr.08 49
8
8: PinPoint Group
ThisgroupincludescommandsspecifictoGPSfeaturesand
thePinPointmodemline.Ifyouarenotconnectingtoa
modemofthePinPointline,youwillnotseethisgroupinthe
menu.
Figure 8-1: AceManager : PinPoint
DTRI=n
EnablemonitoringtheDTRsignalasininputevent.PinPoint
andPinPoint‐Eonly.
• n=0:DisableDTRinputmonitoring.
• n=1:EnableDTRinputmonitoring.
Caution: If DTR is used as an input, DTR cannot be used for low-
power control.
RTSI=n
EnablemonitoringtheRTSsignalasininputevent.PinPoint
andPinPoint‐Eonly.
• n=0:DisableRTSinputmonitoring.
• n=1:EnableRTSinputmonitoring.