User guide

Ace Manager
38 20070914
*HOSTPRIVMODE=n
Setorquerywhetheraprivateorpublic(network)IPistobe
usedwhentheHostinitiatesa1xconnectiontothemodem.
• n=0:Public(network)IPMode:WhentheHostinitiatesa
PPPconnection,thehostwillbegiventhenetworkIP
addressthatwasobtainedfromthecellularcarrierwhile
registeringonthenetwork.IfthenetworkissuesanewIP
address,thecellularconnectionwillbeclosed(sincethe
IP
addresshaschanged)andhastobere‐initiated.(default).
• n=1:PrivateIPMode:WhentheHostinitiatesa1x
connection,thehostwillbegiventheIPaddressspecified
in*HOSTPRIVIP.Themodemwillthenperform1to1
NAT‐likeaddresstranslation,whichshieldstheHostfrom
networkIPchanges.
*HOSTPW=string
HostPasswordforPAPCHAP.
• string=password
*HOSTUID=string
HostUserIDforPAPCHAP.
• string=userid(upto64bytes)
PassThru
PassThruModeisusedtocommunicatedirectlytotheyour
modeminternalhardware.
Caution: While the modem is in PassThru mode, ALEOS is disabled.
If you need to connect to the your modem while it is in PassThru
mode, you will need to do so with a terminal application. Not all
commands are available while the modem is in PassThru mode.
Figure 6-5: AceManager : PassThru
*CSX1=n
PassThruEcho:Echodatatothe host.