User guide

Ace Manager
28 20070914
*NETIP?
Note: If there is no current
network IP address, 0.0.0.0 may
be displayed.
ThecurrentIPaddressofthemodemreportedbytheinternal
module,generallyobtainedfromyourcellularcarrier.Thisis
theaddresscancontactthemodemfromtheInternet.
Tip: Use *NETALLOWZEROIP if you need to allow the display of an
IP ending in a zero.
*NETOP?
Thecurrentcellularcarrierfromthemodemʹsfirmware
version,forexample,Sprint,Verizon,AT&T,TELUS,Bell
Mobility,etc.
*NETRSSI?
ThecurrentRSSI(ReceiveSignalStrengthIndicator)ofthe
modemasanegativedBmvalue.
Tip: The same information is displayed with the command S202?.
*NETSERV?
Thetypeofservicebeingusedbythemodem,forexampleEV‐
DORevAorHSDPA.
*NETSTATE?
Thecurrentnetworkstate:
• ConnectingToNetwork:Themodemisintheprocessof
tryingtoconnecttothecellularnetwork.
• NetworkAuthenticationFail:Authenticationtothe
cellularnetworkhasfailed.Verifysettingstoactivatethe
modem.
• DataConnectionFailed:Themodemfailedtoconnect,
anditisnowwaitingasettimeintervalbeforeitattempts
toreconnect.Verifysettingstoactivatethemodem.
• NetworkNegotiationFail:Networkconnectionnegoti‐
ationfailed.Thisisusuallytemporaryandoftenclearsup
duringasubsequentattempt.
• NetworkReady:Themodemisconnectedtothe1x
cellularnetworkandreadytosenddata.
• NetworkDormant:Theisconnectedtothe1xcellular
network,butthelinkisdormant.Itwillbewokenupwhen
dataissentorreceived.
• NoService:Thereisnocellularnetworkdetected.