User guide

Rev 3.0C Apr.08 27
5
5: Status Group
Mostofthecommandsinthe“Status”grouphaveread‐only
parametersandprovideinformationaboutthemodem.The
StatusGrouphasmorefieldsthatcanbedisplayedonmost
screens.Youcaneitherresizeyourwindoworusethescroll
baronthesidetodisplaytheremainder.
Figure 5-1: AceManager : Status
*BOARDTEMP?
Thetemperature,inCelsius,oftheinternalhardware.
*HOSTMODE?
Thecurrenthostmode(AT,PPP,UDP,etc.).Ifthemodemis
notinATmode,telnetintothemodemtoexecutethis
command.
*NETCHAN?
Thecurrentactive1x/CDMAchannelnumber.
*NETERR?
ThenetworkframeforCDMAorEV‐DOorbiterrorratefor
EDGEorGPRS.