User guide
Connecting to an AirLink Modem with AceManager
Rev 3.0C Apr.08 13
Figure 2-3: UDP
Using TCP
Ifyourmodemisnotconnectedtoyourcomputerdirectly,you
canusethisoptiontoconnectremotelythroughyourcellular
service.TypeintheIPAddressordomainnameofyour
modemandenterthepassword.IfyouhaveusedAceManager
before,youcanselectapreviouslyusedIPor
namefromthe
dropdownmenu.
IfyouhaveaPinPointX,RavenX,Raven‐E,orPinPoint‐E
modem,youcanuseTCPtoconnecttoyourmodemifitis
connecteddirectlytoyourcomputerwithanEthernetcable.
FortheAddress,enterthe*PEERIPofthemodem
(192.168.13.31isthedefault).
Note: If you use a firewall, the TCP port 8088 must be unblocked to
use TCP to send/receive data to the modem.
Figure 2-4: TCP