User guide

Specifications
Rev 2.0 Mar.10 13
Interface Port Pin-Outs
Serial Port
Figure 2-1: Serial Port Diagram: Female DB-9 DCE (not to scale)
Note: The Pin-Out diagram shows external view looking at PinPoint X connector in front
face-plate of device. Pin 1 is lower right.
Figure 2-2: PinPoint X I/O Port Diagram (not to scale)
5
4
3
2
1
9
8
7
6
< - > GND (Ground)
< - DTR Data Terminal Ready)
< - Rx (Receive)
- > Tx (Transmit)
- > DCD (Data Carrier Detect)
Unused
CTS (Clear to Send)
< -
RTS (Request to Send) - >
DSR (Data to Send) < -
1. Analog Input 4 12. Analog Input 3
2. Analog Ground 13. Analog Ground
3. Analog Input 2 14. Analog Input 1
4. No Connect 15. No Connect
5. Reserved for future use 16. Reserved for future use
6. Com2 (for use with #7) 17. Com1 (for use with #18)
7. Normal Open Relay 18. Normal Open Relay
8. GND 19. GND
9. Digital Input 4 20. Digital Input 3
10. Ground 21. Ground
11. Digital Input 2 22. Digital Input 1
GND
GND
1
23456
7
891011
12
13141516171819
202122
GND
GND
NC
NC
Rsv
Rsv
AIN3
AIN4
AIN1
AIN2
DIN1
DIN2
DIN3
DIN4
Relay 1
Relay 2
Com2
Com1
NO2
NO1
GND
GND