User guide

AirLink MP User Guide
26 2130795
Tip: PassThru can only be exited by resetting or power-cycling the modem. This mode
cannot be entered via a remote Telnet session.
You can configure a string of AT commands to be sent to the MP when it enters
PassThru and other PassThru settings.
PassThru Mode allows only specific AT commands. Some ALEOS commands will
be unavailable when the MP is in PassThru mode. The commands usable also
depend heavily on the modem model number (found on the label on the top of the
MP).
Note: Some internal hardware requires upwards of 20 seconds before AT commands can
be entered, so be patient if there seems to be no response to AT commands.