User guide

AirLink MP User Guide
24 2130795
Figure 1-7: Confirm IP Address
Configuring through ACEmanager
AceManager is a free utility. Follow the steps below to connect to AceManager for
configuring the modem.
• Ensure MP connectivity to access AceManager.
• Go to: http://192.168.13.31:9191 (ethernet connection) the first time you
connect to AceManager.
Activating Using AT Commands
An alternate method to configure and activate your MP is by using AT commands
sent directly to the modem with a terminal application. (Refer to the
troubleshooting section).
Caution: It is not possible to activate the MP using either ACEmanager or ACEnet.
Using Direct Commands to the Internal
Hardware
Use only if the ALEOS method is unsuccessful.