Specifications

Testing
Rev 6 Mar.13 Proprietary and Confidential - Contents subject to change 85
!DAGGAVGRSSI Return an averaged RSSI (Received Signal Strength
Indicator) in dBm (GSM mode)
!DAGGRSSIRAW Return the raw RSSI (GSM mode)
!DAGINFO Return GSM mode RF information
!DAGSLOCK Return the RF synthesizer lock state
!DAGSRXBURST Set the GSM receiver to burst mode
!DAGSRXCONT Set the GSM receiver continually on
!DAGSTXBURST Set the GSM transmitter to burst mode
!DAGSTXFRAME Set the GSM Tx frame structure
!DAOFFLINE Place modem offline
!DASBAND Set the frequency band (UMTS / GSM)
!DASCHAN Set the modem channel (frequency) (UMTS / GSM)
!DASLNAGAIN Set the LNA (Low Noise Amplifier) gain state
!DASPDM Set the PDM (Pulse Duration Modulation) value
!DASTXOFF Turn off the Tx PA (Power Amplifier)
!DASTXON Turn on the Tx PA (Power Amplifier)
!DAWGAVGAGC Return averaged RX AGC value (WCDMA)
!DAWGRXAGC Return the Rx AGC (Automatic Gain Control) value (UMTS)
!DAWINFO Return WCDMA mode RF information
!DAWSCONFIGRX Set the UMTS receiver to factory calibration settings
!DAWSPARANGE Set the PA range state machine (UMTS)
!DAWSCHAINTCM Place receive chain in test call mode (WCDMA)
!DAWSSCHAIN Enable secondary receive chain (WCDMA)
!DAWSTXCW Set the waveform used by the transmitter (UMTS)
!DAWSTXPWR Set desired Tx power level (WCDMA)
!OSDSM Display memory usage for DSM (Distributed Shared
Memory) buffer pools
Table C-4: Extended AT commands (Continued)
Command Description