Specifications

Product Technical Specification & Customer Design Guidelines
30 Proprietary and Confidential - Contents subject to change 2400089
43 GND V Ground Input Power - 0 -
44 GPIO3 - General purpose I/O Input high - 1.17 1.80 2.10
Input low - -0.3 - 0.63
Output high - 1.35 - 1.80
Output low - 0 - 0.45
45 NC - No connect - - - - -
46 GPIO4 - General purpose I/O Input high - 1.17 1.80 2.10
Input low - -0.3 - 0.63
Output high - 1.35 - 1.80
Output low - 0 - 0.45
47 NC - No connect - - - - -
48 NC - No connect - - - - -
49 NC - No connect - - - - -
50 GND V Ground Input Power - 0 -
51 GPS_EN_N
3
- Wireless disable (GPS
radio)
Input Low - - 0.7
52 VCC V 3.3 V supply Input Power 3.0 3.3 3.6
1. The host should leave all ‘NC’ (‘no connect) pins unconnected.
2. A —Analog; I — Input; NP — No pull; O — Digital output; PU — Digital input (internal pull up); PD — Digital output (internal pull down);
V — Power or ground
3. Support for this signal is firmware dependent. Contact your Sierra Wireless account representative to determine specific availabil-
ity.
Table 4-1: Connector pin assignments
1
(Continued)
Pin Signal name
Pin
type
2
Description
Direction
to module
Active
state
Voltage levels (V)
Min Typ Max