Specifications

Product Technical Specification & Customer Design Guidelines
18 Proprietary and Confidential - Contents subject to change 2400089
For over-the-air LTE testing, ensure that suitable antennas are used. (Two
antennas are required for this testing; Sierra Wireless offers an LTE-capable
antenna covering 700–2600
MHz BW — please order part number 6000492
(Qty
1 — this contains two antennas).)
Required connectors
Table 1-2 describes the connectors used to integrate AirPrime MC-series
modules into your host device.
Ordering information
To order, contact the Sierra Wireless Sales Desk at [phone] between
8
AM and 5 PM Pacific Time.
Integration requirements
Sierra Wireless provides, in the document suite, guidelines for successful Mini
Card integration and offers integration support services as necessary.
When integrating the MC7710 PCI-Express Mini Card, the following items need to
be addressed:
• Mounting—Effect on temperature, shock, and vibration performance
• Power supply—Impact on battery drain and possible RF interference
• Antenna location and type—Impact on RF performance
• Regulatory approvals—As discussed in Regulatory and Industry Approvals on
page 63.
Table 1-2: Required host-module connectors
1
1. Manufacturers/part numbers are for reference only and are subject to change. Choose
connectors that are appropriate for your own design.
Connector type Description
RF cables • Mate with Hirose U.FL connectors
(model U.FL #CL331-0471-0-10)
• Two or three connector jacks, depending on module
support for diversity and GPS functionality. (Note: The
UDK has two connector jacks.)
EDGE (52-pin) • Industry-standard mating connector
• Some manufacturers include Tyco, Foxconn, Molex
• Example: UDK board uses Molex 67910-0001
SIM • Industry-standard connector. Type depends on how host
device exposes the SIM socket
• Example: UDK board uses ITT CCM03-3518