Installation Guide

4–6 HP Broadband Wireless Module Installation Guide
Removing an HP Broadband Wireless Module
DRAFT Revised: 6/27/07
File: Chap4.fm
PN: CPQ-CPQ Part Number HP-416484-002 U-Unbranded Part Number
hp CONFIDENTIAL
Removing a wireless module from
model 2710p
In model 2710p, the slot for the wireless module is located in the
hard drive bay on the bottom of the computer.
Follow the procedure below to remove an HP Broadband
Wireless Module from the hard drive bay:
Ä
CAUTION: To reduce the risk of damage to electronic components,
discharge yourself of static electricity by touching a grounded metal
object before you begin the following procedure.
CAUTION: Do not pull on an antenna cable to remove it. Gently grip
and pull only on the connector itself. Pulling on the cable can damage
the connector or break it off the cable.
416484-002.book Page 6 Wednesday, June 27, 2007 4:08 PM