Installation Guide

Removing an HP Broadband Wireless Module
HP Broadband Wireless Module Installation Guide 4–5
DRAFT Revised: 6/27/07
File: Chap4.fm
PN: CPQ-CPQ Part Number HP-416484-002 U-Unbranded Part Number
hp CONFIDENTIAL
Ä
CAUTION: Do not pull on an antenna cable to remove it. Gently grip
and pull only on the connector itself. Pulling on the cable can damage
the connector or break it off the cable.
1. Carefully disconnect the wireless module antenna cables 1
from the wireless module by lifting the cable connectors with
your fingernails or a small screwdriver.
2. Remove the 2 Phillips screws 2 that secure the wireless
module to the computer. (The edge of the module opposite
the slot rises away from the computer.)
3. Slide the wireless module away from the slot 3 at an angle
4.
416484-002.book Page 5 Wednesday, June 27, 2007 4:08 PM