Installation Guide

Installing the HP Broadband Wireless Module
HP Broadband Wireless Module Installation Guide 2–11
DRAFT Revised: 6/27/07
File: Chap2.fm
PN: CPQ-CPQ Part Number HP-416484-002 U-Unbranded Part Number
hp CONFIDENTIAL
3. Use the Phillips screwdriver provided in this kit to loosen the
WWAN module compartment cover screw 1.
4. Lift the WWAN module compartment cover away from the
computer 2.
✎
If your computer has a wireless module currently installed, you
must remove it before installing the new module. Refer to
Chapter 4, “Removing an HP Broadband Wireless Module.”
After you remove the existing module, resume this procedure
at step 7 to install the new module.
416484-002.book Page 11 Wednesday, June 27, 2007 4:08 PM