Installation Guide

Installing the HP Broadband Wireless Module
HP Broadband Wireless Module Installation Guide 2–7
DRAFT Revised: 6/27/07
File: Chap2.fm
PN: CPQ-CPQ Part Number HP-416484-002 U-Unbranded Part Number
hp CONFIDENTIAL
CAUTION: To avoid damaging the antenna connector, do not insert
the connector at an angle. Instead, firmly press it straight down until it
snaps into place.
5. Route the MAIN antenna cable 1 (labeled with the number 5
or with a red band) as shown in the illustration, and then
connect it to the MAIN terminal 2 on the wireless module.
✎
Be sure that the antenna cable is routed through the channel in
the frame of the computer so that it does not obstruct the SIM
detect switch
3 or lie across the raised edge of the frame.
416484-002.book Page 7 Wednesday, June 27, 2007 4:08 PM