Installation Guide

Installing the HP Broadband Wireless Module
HP Broadband Wireless Module Installation Guide 2–5
DRAFT Revised: 6/27/07
File: Chap2.fm
PN: CPQ-CPQ Part Number HP-416484-002 U-Unbranded Part Number
hp CONFIDENTIAL
Installing the wireless module
✎
If your computer has a wireless module currently installed, you
must remove it before installing the new module.
Refer to
Chapter 4, “Removing an HP Broadband Wireless Module.”
After you remove the existing module, begin the following
procedure at step 3 to install the new module.
1. Remove the tape 1 securing the antenna cables.
2. Gently remove the plastic cover 2 from the MAIN antenna
cable (labeled with the number 5 or with a red band) and
from the AUX antenna cable (labeled with the number 6 or
with a blue band).
416484-002.book Page 5 Wednesday, June 27, 2007 4:08 PM