User's Guide

1
Congratulations on your purchase of a Fujitsu LIFEBOOK® Tablet PC in Wireless Wide Area Network (WWAN) or
WWAN-ready configuration.
This document first instructs you on how to determine whether there is a WWAN module already installed in
your system. If you do not have a WWAN module installed (i.e., your system is “WWAN-ready”), you will learn
how to order and install a module, and (for AT&T customers) how to install and activate a SIM card.
Verifying whether you have a WWAN module installed
Launch the Fujitsu Bonus Apps icon on the desktop. If Fujitsu Bonus Apps include a WWAN driver in blue, it
indicates that your system is WWAN-ready, but there is no WWAN module; if the WWAN driver is grayed out,
it indicates that the WWAN module is already installed. In both cases, Sierra AirCard Watcher will need to be
installed from Fujitsu Bonus Apps. For some models, the WWAN driver will not appear in Fujitsu Bonus Apps.
If only Sierra AirCard Watcher appears, then your system has WWAN module installed already. Proceed to
install Sierra AirCard Watcher.
If you have a WWAN module installed in your system, it is not necessary for you to complete the rest of this
procedure; please proceed to theInstalling Sierra AirCard Watcher section on page 3 before connecting your
device.
If you don’t have a WWAN module installed in your system, please continue with the rest of this procedure.
Obtaining a WWAN module for your system
To obtain a WWAN module for your WWAN-ready system, go to the Fujitsu online store at:
http://store.shopfujitsu.com/fpc/Ecommerce/accstore.jsp
On this page choose Wireless WAN and then choose WWAN Module (Gobi3000).
Installing a WWAN module in a WWAN-ready system
If you have a WWAN-ready system, and you would like to install a WWAN module, there are two different
things that could occur when you install the WWAN driver from Fujitsu Bonus Apps.
If you don’t have a WWAN module installed yet:
Fujitsu Bonus Apps will display a message telling you that the "WWAN Driver was not installed: Optional
device is not detected”.
If you want to install a WWAN module at a later date:
Install the WWAN driver from Fujitsu Bonus Apps by launching the "Fujitsu Bonus Apps" desktop icon, select-
ing WWAN driver (should be highlighted in blue), and pressing the [Install] button.
Material and Tools required
Material Required: WWAN Upgrade Kit
Tools Required: Philips Screwdriver, #0
Tools Recommended: Tweezers (for attaching cables to antenna posts)
Wireless Wide Area Network
(WWAN) Getting Started Guide
SPECIFIC WWAN MODULE/S ARE TESTED WITH THIS COMPUTER FOR COMPLIANCE WITH FCC REGULATIONS. THESE WWAN
MODULE/S ARE FUJITSU-SPECIFIC AND ONLY THE WWAN MODULE/S SHOWN IN THE FOLLOWING LINKS ARE AUTHENTICATED
TO WORK IN THIS COMPUTER. WWAN MODULES OBTAINED FROM ANY OTHER SOURCE WILL NOT WORK IN THIS COM-
PUTER. YOU ARE STRONGLY ADVISED TO ORDER YOUR WWAN MODULE FROM A FUJITSU-AUTHORIZED SOURCE. IN THE
EVENT YOU INSTALL A WWAN MODULE THAT HAS NOT BEEN AUTHORIZED BY FUJITSU, FUJITSU ASSUMES NO RESPONSIBILITY
FOR DAMAGES TO THE DEVICE OR YOUR COMPUTER THAT MAY RESULT FROM ITS INSTALLATION.
Gobi 3000-WWAN GSG.fm Page 1 Saturday, September 15, 2012 1:10 PM

Summary of content (4 pages)