User guide

IPsec User Guide
13 2120028
m. Outgoing Host Out of Band:Toaccessinternetby
bypassingtheIPSectunnel,youcansetthisparameter
as“
1”.
Note: In Chapter 1, Remote Access Scenarios section includes the
Google web server scenario, where the outgoing Host Out of Band
can be set to 1 to access internet outside the IPSec tunnel.
3. ClickonWrite,inthetopbar.
4. Clickon
Reset,toresetthemodem.
5. IPSecstatusdisplaysas“Connected”.
Onceth
etunnelcomesup,pingthewebbrowser.Theweb
browsershouldbeabletoreachtheserver.Anexampleofa
webbrowserscreenshot,afterthetunnelestablishes,is
provided.
Figure 2-4: Web Browser
Application Server
ASierraWirelessAirLinkModemsendsAVLA pplication
ServerdatathroughthetunnelfortheReportServerthatis
behindtheIPsecGateway.
TheC
onfigurationstepsare:
1. InA
ceManager,clickonthePinPointtabandensurevalues
thatcorrespondtoFigure2‐5.