User guide

Rev 2.2 Jun.11 6
2
2: Installation and Configuration
• Set-Up
• Installation
• Configuration Settings Thischaptercoversinstallationandconfigurationsteps(Sierra
Wirelesstestset‐up),tousetheIPSecfeature.
Note: Factory default settings
allow you to connect to Sierra
Wireless test equipment.
Theillustrationbelowshowstheuserbeingconnectedtothe
SierraWirelesstestenvironmentsetup.Theuserlaptop
connectedtoanAirLinkmodem,communicateswiththeweb
serverovertheinternetandthroughtheSierraWirelessVPN
Gateway(CiscoandNetgear).
Figure 2-1: User set up
Oncethetunnelisestablishedandyouareconnectedtothe
webserver,thewebbrowserdisplaysconnectivitytothe
SierraWirelessIPSectestserver.
Figure 2-2: Connection to the web browser