User guide

GX400 HSPA+ User Guide
24 2140712
Physical Interfaces
The AirLink GX400 has the following physical interfaces and connection methods:
• Primary Cellular - 50 Ohm SMA
• Receive Diversity - 50 Ohm SMA
• GPS - 50 Ohm SMA
• USB OTG Micro A/B locking
• 1 Ethernet port
• 1 serial port
Requirements
1. Cellular Account from a cellular provider.
2. Software:
· ACEmanager - Graphical interface for configuring/managing the GX400.
· A terminal application (e.g., Microsoft HyperTerminal).
3. Hardware:
· Ethernet cable -10/100 fast Ethernet interface for management, software
downloads/upgrades and data communication.
· Serial cable - A serial console port is available for initial product configura-
tions and debug.
· USB cable Type "A" to micro type "B" (could be locking)
Note: The USB port cannot configure the device until a driver is installed on the
connecting computer.
· Power adapter and a power source - You will need a power supply and
power source for the device.
· PC or laptop - To configure the device, you will need a computer with an
available Ethernet, serial, or USB port.
Refer to the ACEmanager Configuration User Guide for more details on
configuration via Ethernet, serial, and USB.