User guide

GX400 HSPA+ User Guide
18 2140712
The GX400 has an embedded radio module, also made by Sierra Wireless,
Inc. There are two firmware programs on the device—one stored on the con-
troller board of the GX400 and one on the radio module.
The firmware was loaded into the radio module and controller board when the
GX400 was assembled. As new versions of the software and firmware are
released, they are posted at www.sierrawireless.com.
Documentation
This GX400 HSPA+ User Guide describes how to:
• Install the GX400 hardware.
• Connect the radio antennas.
• Connect a notebook computer and other input/output
(I/O) devices.
• Interpret the LEDs on the GX400 and the indicators in the ACEview software.
This User Guide is provided as a PDF (Portable Document Format) file on the
installation CD or from the Sierra Wireless support website.
Software Documentation
Refer to the ALEOS 4.2.1 configuration User Guide for further details related to
device configuration and management. Chapters in this user guide explain the
paramenters in ACEmanager and provide relevant configuration detail, including
user scenarios for certain sections in the user guide.
Tools and Reference Documents
User Guide Description
ALEOS User Guide This document discusses software configuration in ACEmanager and explains all the
ALEOS features.
ACEview User Guide This document explains the use of this utility tools which is used to view and monitor the
connection state of a Sierra Wireless AirLink device.
AceNet 3.0 User
Guide
This document explains the use of AceNet services for the remote management of Sierra
Wireless AirLink devices.