Technical data
INTRODUCTION TO THE UNIVERSAL DEVELOPER’S KIT
67
LZT 123 8020 R1A
11.5 System Requirements
The system requirements are:
• Personal Computer (PC) or unit compatible for RS232
communications.
• An unused serial port (COM1…. COM4) for communication
between the developer's board and the PC.
• A second serial port may also be required for additional
functionality.
• A terminal program such as HyperTerminal, Kermit,
Procomm, etc…
11.6 GX-47/48 Family; Connection
Figure 13.2 GX-47/48 Connection Diagram
• Connect serial cable from UDK board port 1 to an available
serial port on the PC.
• The DC power supply provides the necessary 12VDC.
• Connect the power cable to the power supply and the AC
outlet; select the appropriate line cord dependant on your
location.
• Connect the output of the power supply to the power jack on
the UDK board.
• Attach the provided antenna cable to the SMA antenna jack
on the UDK board or directly to the primary RF output port of
the module.