Technical data

INTRODUCTION TO THE UNIVERSAL DEVELOPER’S KIT

LZT 123 8020 R1A

11.3 Mounting a GX-47/48

This assembly will require (included in kit):

Description Manufacturer, Part # Qty

2-56, .156" O.D., 1/4" Length Standoffs Digi-Key 1801BK-ND 2

2-56 x 1/2" Phillips Panhead Stainless Steel

Machine Screw

Digi-Key H701-ND 2

2-56 Lock Washer, Inside Tooth, Stainless

Steel (Use on bottom only)

Digi-Key H728-ND 2

2-56 Hex Nut Digi-Key HD723-ND 1

Figure 13.1 Exploded View of Developer's Board with GX-47/48

11.4 Assembly instructions:

• Use 1/2" screw with lock washer through the bottom of

board to attach each 1/4" long standoff.

• Plug the module into the 60-pin connector X602.

• Attach module to standoff using a single 2-56 nut.

• Attach RF cable from module to J402. Make RF connections

at J401 (SMA connector)

Note! Components under shield cans are sensitive to ESD and should

be handled with appropriate measures.