Technical data

INTRODUCTION TO THE UNIVERSAL DEVELOPER’S KIT

LZT 123 8020 R1A

Cable, 40-pin to 30-pin ribbon interface (DM-

XX)

Sony Ericsson,2/1078

TVK 117 2403

Cable, 40-pin to 40-pin ribbon interface (CM-

xx, GM-xx)

Sony Ericsson,3/1078

TVK 117 2403

Cable, MMCX rt. angle to MMCX straight Sony Ericsson,1/1078

TVK 117 2403

UDK Developer's Board ROA 117 2449 1

Nut, 2-56 Hex Digi-Key, HD723-ND 2

Nut, 4-40 Hex Digi-Key, HD724-ND 5

Rubber Feet Allied, SJ-5303 6

Screw, 2-56, 1/2" Length Digi-Key, H701-ND 2

Screws, 4-40, 5/16" Length Digi-Key, H704-ND 18

Stand-offs, 4-40, .250" O.D., 3/4" Length Digi-Key, 3481K-ND 2

Stand-offs, 4-40, .250" O.D., 5/8" Length Digi-Key, 1839K-ND 4

Stand-offs, 2-56, .156" O.D., 1/4" Length Digi-Key, 1801BK-ND 2

Washer, 2-56 Lock Inside Tooth Digi-Key, H728-ND 2

Washer, 4-40 Lock Inside Tooth Digi-Key, H729-ND 12

Aluminum Heat-Sink Sony Ericsson, SXA

1341627

Thermal Pad Comrades,

69-11-23587-T725

Documentation CD Sony Ericsson 1

Table 1: Universal Developer's Kit Content List

11.2 Assembling the Developer's Board

The developer's board has been designed to work with several

families of modules. Therefore you will need to assemble the

mounting hardware based on the particular version of the

module you are using. There are four different assemblies: the

GM-41, the DM-xx family, the CM-4x family which requires a

heat sink for 3W usage, and the smaller Gx-47/48.