User guide

WA_DEV_GL6100_PTS_001 Rev 004 November 30, 2010 80
16. Embedded Peripherals
This section enumerates the peripherals embedded within the GL61x0.
16.1. I/O Connector
The I/O connector applied on board is an 8-pin Micro-Fit connector. The connector information is
listed in the table below.
Table 63. 8-pin Micro-Fit Connector
Supplier
Description
Vendor Part
Number
Molex
3.00mm Pitch Micro-Fit 3.0™ Header, Surface Mount
Compatible, Dual Row, Right Angle, with Snap-in Plastic
Peg PCB Lock, 8 Circuits, Tin (Sn) Plating, Glow Wire
Compatible
430450800
16.2. SIM Card Socket
The recommended SIM connector to use with the GL61x0 is described in the table below.
Table 64. Recommended SIM Card Socket
Manufacturer
Description
Order Number
KYOCERA
6 Positions, With (15.54mm Pitch) Boss, Without Lock
04 5036 006 299 862+