User guide

WA_DEV_GL6100_PTS_001 Rev 004 November 30, 2010 30
GL61x0 Product Technical
Specification and User Guide
Technical Specifications
5.1.2. GL6110 – USB Version
For the GL6110, Vin is 5V.
Refer to the following table for the consequences of supplying the GL6110 with too much or too little
voltage. Note that the correct operation of the GL6110 in connected mode is not guaranteed if the
input voltage falls below 4.75V.
Table 15. Effects of Power Supply Defect for the GL6100
If the voltage
Then
Falls below 4.75V
GSM communication is not guaranteed.
Is over 5V (transient peaks)
The GL6110’s protection is guaranteed by internal settings.
Is over 5V (continuous over voltage)
The GL6110’s protection is done by internal Transil Diode (the
supply voltage is disconnected).
5.2. Mechanical Specifications
5.2.1. Mechanical Drawing
The following diagram describes the mechanical specification of the GL61x0.