Network Router User Manual

Global Positioning System (GPS)
Rev 3.0B Feb.08 94
Figure 9-23: AceManager : *PPFLUSHONEVT
NMEA Configuration
Messages Over-The-Air (Remote)
ToconfigurethePinPoint‐EtosendNM EAreportstoaremote
server,youwillneedtoset3commands:*PPIP,*PPPORT,and
*PPGPSR.
a. Set*PPIPand*PPPORTtotheIPaddressandportof
theservertowhichyouwantthereportssent.
Figure 9-24: AceManager : PinPoint - *PPIP/*PPPORT
b. SettheGPSReportType(*PPGPSR)toyourpreferred
NMEAsentenceformat.
Figure 9-25: AceManager : PinPoint - *PPGPRSR
• E0‐NMEAGGAandVTGsentences.
• E1‐NMEAGGA,RMC,andVTGsentences.
Local Host
LocalreportsaresenttothelocalIPaddressofthecomputeror
deviceconnectedtotheserialportofthePinPoint‐EusingPPP.
Toconfigurethemodemtosendtothe localIP,youwillneed
toset3commands:*S53,*PPLATS,and*PPLATSR.
a. Settheport(S53)tothelocalporttowhichyouwant
thereportssent.ThelocalIPaddresswillautomati
‐