Network Router User Manual

Data Communication and Host Modes
Rev 3.0B Feb.08 60
PassThruModeallowsonlyspecificATcommands.Some
ALEOScommandswillbeunavailablewhenthePinPoint‐Eis
inPassThrumode.Thecommandsusablealsodependheavily
onthemodemmodelnumber(foundonthelabelonthetopof
thePinPoint‐E).
Note: Some internal hardware requires upwards of 20 seconds
before AT commands can be entered, so be patient if there seems to
be no response to AT commands.
Te l n e t M o d e
InAceManageryoucanconfigureTelnetoperation.
Figure 7-3: AceManager : S0
IfyouneedtochangetheportforTelnet(forexample,you
havethedefaultportblockedonyourfirewall),theoptionis
ontheOthertab.Thedefaulttelnetportis2332.Youcanalso
changetheTelnettimeout, iftheconnectionisidle,default2
minutes.
Figure 7-4: AceManager : Other - *TPORT, *TELNETTIMEOUT.
Serial Modes
PPP
InPPPmode,thePinPoint‐E actsasaPPPserver,providingan
IPaddress,andDNSservers(ifavailable)totheconnected
deviceorcomputer.