Network Router User Manual

Rev 3.0B Feb.08 22
3
3: Activating your PinPoint-E on
the Verizon Network
• Automatic Activation
• Setup Wizard
• Activating Using AT
Commands
Thischapterprovidesstep‐by‐stepdirectionsforactivating
yourPinPoint‐EontheVerizoncellularnetwork.
Automatic Activation
OneofthespecialfeaturesofyourPinPoint‐EforVerizonisthe
abilitytoactivateitselfautomatically.Whenyoufirstpoweron
thePinPoint‐E,itwillchecktoseeifithasbeenactivatedwith
accountdata.Ifitfindsthatithasnotyetbeenactivated,the
PinPoint
‐Ewillattempttoretrievetheaccountdatafromthe
VerizonnetworkusingOver‐the‐AirServiceProvisioning
(OTASP).
Caution: You need to have an account with Verizon before you
attempt automatic activation. If you have not ordered an account
from Verizon for your PinPoint-E, it will not succeed at activating.
a. AttachtheantennatoyourPinPoint‐E.
b. PlugthePinPoint‐Eintopower.
c. WhiletheLEDlightscyclefromtheoutsidetothe
inside,thePinPoint‐Eisattemptingtodownloadits
accountinformation.Thedownloadprocessmaytake
aboutaminuteortwo.
Caution: Do not move your PinPoint-E while it is being programmed.
d. Whenthelightsilluminate,yourPinPoint‐Ehas
successfullycompletedOTASPand isregisteredonthe
Verizonnetwork.
e. Optional:IfyouneedtoupdatetheALEOSfirmware,
changetheaccountinformation,orwanttotestthe
accountsettingsofyourPinPoint‐E,followthedirec
‐
tionsbelowtousetheSetupWizard.Otherwise,skip
theWizardstepsandgototheHardwareInstallation
section.