Network Router User Manual

Configuration Commands
Rev 3.0B Feb.08 118
+GSN
ESN(ElectronicSerialNumber)oftheinternalhardware
module.
Common
ThegroupsundertheheadingCommonencompassthose
commandsthatarecommontomostSierraWirelessAirLink
modems.
Misc (Miscellaneous)
Thecommandsofthe“Misc”groupareavarietyofcommands
thatdon’tdirectlyfitinothercategories.
Figure 1-5: AceManager : Misc
+++
Note: +++ is not proceeded by
AT nor does it require a carriage
return (enter). There must be an
idle time (set by S50) on the
serial port before and after this
command.
ATEscapesequence.IfthePinPoint‐Eisinadatamode(any
modeotherthanPassThru),thiscommandcausesthemodem
tore‐enterATcommandmode.The“+”isASCII0x2B.
+++ is
not available in AceManager.

Tip: DAE=1 disables the +++ command.