DART 200 CDPD Modem User's Guide

DART 200 CDPD Modem User’s Guide 1 Introduction
Sierra Wireless, Inc. 1-6
Table 1-1. Basic AT command set (cont.)
*C Enable/Disable SLIP TCP Header Compression
*E Enable Network Connection with PIN
*G SLIP Multicast Address Selection
*K TCP PAD Keep Alive
*L Set Listen Port Number
*M Set MAS IP Address for SLIP
*P Ping Remote Host
*R Automatic SLIP Restart
*S Start SLIP (Serial Line IP) Mode
*T Telnet Keep Alive
*U Unblock Modem - Pin Access
Table 1-2. Service Provider AT command set
^A Set the IP Address of modem
^C Clear Blocked Status
^F Force PIN Usage
^G Set Multicast Group ID
^H Set Service Provider ID
^I Set Service Provider network ID
^L Set the Local Service Area ID
^P Enable/disable Supervisor Mode
^S Set the Modem SLIP Address
-L Set Channel Lock
-R Software Reboot
-V View Radio Resource Management Data
-Z View Modem Credentials