User guide

Raven XE
3 20080617
Note: Until you install a driver for the USB port, you cannot use your
USB port to configure the modem.
• Poweradapterandapowersource‐Youwillneeda
powersupplyandpowersourceforthemodem.
• PCorlaptop‐Toconfigurethemodem,youwillneeda
computerwithanavailableserialport.
Tools Required
• SmallPhillipsscrewdriver‐ThePhillipsscrewdriveris
theonewhichisalsocalledaplus(+)orXscrewdriver.
Figure 0-1: Faceplate
Warning: Explosion Hazard. Do Not remove or
replace Plug-in Modules unless power has been
disconnected or the area is known to be free of
ignitible concentrations of flammable Gasses or
vapors.
a. Usingasmallphillipsheadscrewdriver,removethe
screwsonthefrontoftheRavenXE.
2. Remove the SIM from the card
a. CarefullyremovetheSIMcardfromthecardyou
receivedfromyourcellularprovider.