User guide

Rev 1.0D Jul.09 12
• TheResetbutton(ontheleftsideoftheRavenXE)hastwo
functions.Ifitisquicklydepressedandreleased,the
modemwillsimplypowercycletheinternalhardware.If,
however,theresetisdepressedandheldfor several
seconds(countapproximately30seconds,andwaitforthe
power
lighttogooffafterthelightpatternstops),the
ALEOSconfigurationsettingswillreturntothefactory
defaults.
Light Patterns
TheLEDsonthefrontofthemodemwillrespondindifferent
patternstoindicatemodemstates.
• Normal‐EachLED,mentionedabove,islitasapplicable.
• Startup‐TheLEDswillcyclefromlefttoright.
• ConfigurationReset‐TheLEDswillcyclelefttorightand
thenrighttoleft4times.
• AuthenticationFailure‐TheNetwork,Signal,and
ActivityLEDsblinkevery2seconds.
• DataRetry‐TheNetwork,Signal,andActivityLEDsblink
every3seconds.
Caution: If you reset the modem configuration using the reset button,
you may to reconfigure your APN.