User guide

Installation of the Raven X
Rev 3.0 Mar.12 31
Light Patterns
The LEDs on the front of the modem will respond in different patterns to indicate
modem states.
• Normal - Each LED, mentioned above, is lit as applicable.
•Start up - The LEDs will cycle from left to right.
•SOS - The Network and Service LEDs will blink alternately.
• Configuration Reset - The LEDs will cycle left to right and then right to left 4
times.
• Authentication Failure - The Network, Signal, and Activity LEDs blink every
2 seconds.
• Data Retry - The Network, Signal, and Activity LEDs blink every 3 seconds.
• Invalid MAC Address or Ethernet Initiation Fail - The Service LED will
blink.