User guide

Rev 2.0 Mar.12 23
3
3: Activating the Raven X
• Installing the SIM
• Configuring the
APN
This chapter provides step-by-step directions for activating your
Raven X on your cellular provider’s network.
H
Installing the SIM
The Subscriber Identity Module (SIM) in the Raven X is a smartcard
that securely stores the key identifying a cellular subscriber.
Generally, you will only need to install a SIM once in the life of the
modem and it may be pre-installed by your Sierra Wireless
Representative.
If the SIM was pre-installed, unless you need to set a custom APN,
activation of your modem is complete.
Cellular Account Required
• Cellular Account Required - To use your modem, you need to
have a SIM with an active account in a data plan with your
cellular provider.
Software Required
• ACEmanager - Graphical interface for entering most AT
Commands. You can download ACEmanager from the Sierra
Wireless AirLink Solutions website: http://
www.sierrawireless.com/support/. A default installation of this
utility is assumed later in these directions
Hardware Required
• Ethernet cable or serial cable - An Ethernet cable or straight
through serial cable.
• Power adapter and a power source - You will need a power
supply and power source for the modem.
• PC or laptop - To configure the modem, you will need a
computer with an available Ethernet port or serial port.
Tools Required
• Small Phillips screwdriver - The Phillips screwdriver is also
called a plus (+) or X screwdriver.
• Slim stylus - A PDA stylus, an unbent paperclip, or other such
item.