User guide

AirLink GX400 for Verizon User Guide
34 2140712
Mounting Adapter
An optional Mounting Adapter Kit (P/N 1202406) is available from Sierra Wireless
for mounting the GX400 when replacing a PinPoint X device. The GX400
Mounting Adapter Kit includes:
• One mounting adapter
• Four #8 sheet metal/wood-type screws
• Four internal lock washers
The adapter is designed to reuse the mounting holes of a PinPoint X for a GX400
installation. The adapter is attached to a stationary location, and the GX400 is
attached to the adapter.
Figure 3-10: GX400 Mounting Bracket and Dimensional Diagram (Not to scale)
Installation steps for the GX400 with mounting adapter are as follows:
1. Position the mounting adapter in the exact place where the PinPoint X was
previously secured.
Note: When the bracket is correctly positioned, the small end of the keyhole mounting hole
will be on top.
Tip: For reasons of stability and to ensure a secure GX400 mount it is highly
recommended that all four mounting screws be used in the bracket installation.
2. Insert all four screws (with washers attached) through the recessed mounting
ears and the raised bracket mounting holes. Tighten the screws until they are
hand tight but secure.
3. Connect your power cable, serial or Ethernet cable, and all antennas to the
device’s interface ports.
162 mm
6.4 in
97.5 mm
3.8 in
147.9 mm
5.9 in
68.2 mm
2.7 in
4 Pics
8-32 Tap