User guide

WA_DEV_FEX20_UGD_002 Rev 004 March 08, 2011 75
Fastrack Xtend User Guide
Using the Fastrack Xtend
4. Connect the serial cable and screw both sides.
5. Plug the 6-wire cable accessory into the Fastrack
Xtend and switch on the external power supply
source.
Refer to section 9.7 Main AT Commands for the Fastrack Xtend for the list of main AT Commands
used to configure the Fastrack Xtend.
Note: For automotive applications, it is recommended to connect the DC-IN line of the Fastrack Xtend
directly to the positive terminal of the battery.