User guide

WA_DEV_FEX20_UGD_002 Rev 004 March 08, 2011 4
Fastrack Xtend User Guide
Document History
Version
Date
Updates
001
November 23, 2009
Creation
002
April 26, 2010
Updated Charging Specification to specify which charging method takes
precedence when both options are available.
Added section 16 Reliability Compliance and Recommended Standards .
Removed Appendix C and moved its former contents to section 17
Certification Compliance and Recommended Standards.
Updated Figure 4 Fastrack Xtend Mechanical Drawing.
Updated terminologies from:
 IESM to Expansion Card
 inSIM to Embedded SIM
 Wireless CPU to Intelligent Embedded Module/embedded module
 Open AT
®
Software Suite to Sierra Wireless Software Suite
Updated Table 76 Power Consumption of FXT003 in Connected Mode
(Typical) and Table 78 Power Consumption of FXT003 in Non-Connected
Mode (Typical)
Updated the Power Consumption values in Table 72 Initial Power
Consumption (Typical)*.
Added section 7.3 Expansion Card Design Suggestion
Updated Appendix A: Packaging and Appendix B: Product Labeling
003
October 12, 2010
Updated product pictures throughout the document
Added a note after Figure 22 Fastrack Xtend Back Interface to indicate which
interfaces are available in which Fastrack Xtend variant.
Removed irrelevant AirPrime reference documents from section 19.5 Other
Related Documentation
Added information for FXT009 and FXT010 throughout the document;
Removed information for FXT006, FXT007 and FXT008 throughout the
document.
Added warning information about the use of the battery accessory in section
15 Recommendations when Using the Battery Accessory.
Updated the Fastrack Supreme 20 column in Table 1 Fastrack Xtend versus
Fastrack Supreme.
Updated 5.1.1.1 General Purpose Input/Output.
Added a note for entering Sleep Mode in section 12 Power Consumption.
Updated the Vocoder features for FXT004 in Table 5 Fastrack Xtend Basic
Features by Variant.
Changed instances of 6-wire power supply cable to 6-wire cable accessory.
004
March 08, 2011
Updated product images throughout the document (from blue to red plate).
Added a footnote after Table 3 Fastrack Xtend Variants stating that FXT001
and FXT002 are being replaced by FXT009.
Added information and notes specific to FXT004 throughout the document
which includes but are not limited to:
 Added Table 100 Standards Conformity for FXT004
 Updated Table 2 Fastrack Xtend Physical Dimensions, Table 8
Power Supply Connector Pin Description
 Added section 5.2.3.3 RF Performances (For FXT004)
 Added section 5.2.3.4 Antenna Specifications for FXT004
Updated Figure 4 Fastrack Xtend Mechanical Drawing.